HOT DEALS

Oneway, 8” Drum for Vacuum Chuck with 1 1/4" x 8 TPI Insert

Please check with us for availabilityOneway Model #2980, 8” Vacuum Chuck, with 1 1/4" x 8 TPI InsertVacuum chucking is one of those things that has to be seen to be believed. Put your piece on the drum chuck, turn on the vacuum and turn on your lathe...

Oneway, 12" Drum for Vacuum Chuck with 3/4" x 16 TPI Insert

Please check with us for availabilityOneway Model #2987, 12" Vacuum Chuck, with 3/4" x 16 TPI InsertVacuum chucking is one of those things that has to be seen to be believed. Put your piece on the drum chuck, turn on the vacuum and turn on your lathe...

Oneway, 12" Drum for Vacuum Chuck with 1 1/4" x 8 TPI Insert

Please check with us for availabilityOneway Model #2987, 12" Vacuum Chuck, with 1 1/4" x 8 TPI InsertVacuum chucking is one of those things that has to be seen to be believed. Put your piece on the drum chuck, turn on the vacuum and turn on your lathe...

Oneway, 5 1/2” Drum for Vacuum Chuck with 1 1/4" x 8 TPI Insert

Please check with us for availabilityOneway Model #2979, 5 1/2” Vacuum Chuck, with 1 1/4" x 8 TPI InsertVacuum chucking is one of those things that has to be seen to be believed. Put your piece on the drum chuck, turn on the vacuum and turn on your lathe...

Oneway, 3 1/2” Drum for Vacuum Chuck with 1 1/4" x 8 TPI Insert

Please check with us for availabilityOneway Model #3008, 3-1/2” Vacuum Chuck, with 1 1/4" x 8 TPI InsertVacuum chucking is one of those things that has to be seen to be believed. Put your piece on the drum chuck, turn on the vacuum and turn on your lathe...

Oneway, 3 1/2” Drum for Vacuum Chuck with 3/4" x 16 TPI Insert

Please check with us for availabilityOneway Model #3008, 3-1/2” Vacuum Chuck, with 3/4" x 16 TPI InsertVacuum chucking is one of those things that has to be seen to be believed. Put your piece on the drum chuck, turn on the vacuum and turn on your lathe...

Oneway, Vacuum Pump, 220 Volt

Please check with us for availabilityOneway Vacuum Pump - 220 Volt. In order to turn using vacuum, you will need a vacuum pump and/or motor. Due to the seriousness of injury that can occur due to vacuum pump failure, Oneway R&D was extensive and thorough...

Oneway Grinding Point for Termite Bit

Please check with us for availabilityOneway Grinding Point for Termite Bit.Unprecedented ease in hollowing, finishing, and thin wall turning make this tool a must in every turner's arsenal. It will allow you to do end grain hollowing faster, deeper, and...

Oneway, Full Point Cone

Please check with us for availabilityOneway Full Point Cone is especially suitable for candle-stick type artistry.Features:Oneway Model #2172A full point cone is especially suitable for candle-stick type artistryFounded in 1991, a family-owned company...

Oneway, 20"-24” Back Rest for the Hollowing System, No Clamp Block

Please check with us for availabilityOneway 20-24” Back Rest without clamp block.The Oneway Laser-Guided Hollowing System has been designed to make turning hollow forms easier and safer. A laser pointer is set so the laser light is offset from the...

Oneway, 20"-24” Laser Hollowing System, no clamp block

Please check with us for availabilityOneway 20-24” Complete Laser Hollowing System (NO clamp block). Laser guided hollowing systems allow the turner to easily gauge the wall thickness of a vessel while it is being cut.The Oneway Laser-Guided Hollowing...

Oneway, Long Vee-Arm for the Wolverine Grinding Jig

Please check with us for availabilityOneway Vee Arm for the Wolverine Sharpening System - 37 1/2" Long.Oneway has set the standard for sharpening jigs with the Wolverine system. Your woodturning shop is not complete without the Wolverine system as part...

Oneway, Front Post Assembly for the Easy Core System

Please check with us for availabilityOneway Front Post Assembly.Coring will save you time, save your energy, save your tools, save your wood, and can save on a huge amount of clean-up. All these things ultimately save you money! Coring is a very time...

Oneway, 10”-12” Back Rest for the Hollowing System, No Clamp Block

Please check with us for availabilityOneway 10”-12” Back Rest, for the Oneway Hollowing System without clamp block. The backrest is large, and easily adjustable for both overall height and height of the gate.The Oneway Laser-Guided Hollowing System has...

Oneway, 9” Easy Core Bowl Coring Knife Set with Steel Cutter

Please check with us for availabilityOneway 9” Easycore Knife Set. There are four knife sets available for a complete system (sold separately.) Coring doesn't have to be a scary, unnerving experience anymore. Even novice turners with a bit of instruction...

Oneway, 16"-20" Back Rest for the Hollowing System, No Clamp Block

Please check with us for availabilityOneway 16”-20” Back Rest, for the Oneway Hollowing System without clamp block. The backrest is large, and easily adjustable for both overall height and height of the gate.The Oneway Laser-Guided Hollowing System has...