Vacuum Chucks

Oneway, 5 1/2” Drum for Vacuum Chuck with 3/4" x 16 TPI Insert

Please check with us for availabilityOneway Model #2979, 5 1/2” Vacuum Chuck, with 3/4" x 16 TPI InsertVacuum chucking is one of those things that has to be seen to be believed. Put your piece on the drum chuck, turn on the vacuum and turn on your lathe...

Oneway, 8” Drum for Vacuum Chuck with 3/4" x 16 TPI Insert

Please check with us for availabilityOneway Model #2980, 8” Vacuum Chuck, with 3/4" x 16 TPI InsertVacuum chucking is one of those things that has to be seen to be believed. Put your piece on the drum chuck, turn on the vacuum and turn on your lathe...

Oneway, 8” Drum for Vacuum Chuck with 1 1/2" x 8 TPI Insert

Please check with us for availabilityOneway Model #2980, 8” Vacuum Chuck, with 1 1/2" x 8 TPI InsertVacuum chucking is one of those things that has to be seen to be believed. Put your piece on the drum chuck, turn on the vacuum and turn on your lathe...

Oneway, 12" Drum for Vacuum Chuck with 3/4" x 16 TPI Insert

Please check with us for availabilityOneway Model #2987, 12" Vacuum Chuck, with 3/4" x 16 TPI InsertVacuum chucking is one of those things that has to be seen to be believed. Put your piece on the drum chuck, turn on the vacuum and turn on your lathe...

Oneway, 5 1/2” Drum for Vacuum Chuck with 1 1/2" x 8 TPI Insert

Please check with us for availabilityOneway Model #2979, 5 1/2” Vacuum Chuck, with 1 1/2" x 8 TPI InsertVacuum chucking is one of those things that has to be seen to be believed. Put your piece on the drum chuck, turn on the vacuum and turn on your lathe...

Oneway, 12" Drum for Vacuum Chuck with 1 1/2" x 8 TPI Insert

Please check with us for availabilityOneway Model #2987, 12" Vacuum Chuck, with 1 1/2" x 8 TPI InsertVacuum chucking is one of those things that has to be seen to be believed. Put your piece on the drum chuck, turn on the vacuum and turn on your lathe...

Oneway, 3 1/2” Drum for Vacuum Chuck with 1 1/2" x 8 TPI Insert

Please check with us for availabilityOneway Model #3008, 3-1/2” Vacuum Chuck, with 1 1/2" x 8 TPI InsertVacuum chucking is one of those things that has to be seen to be believed. Put your piece on the drum chuck, turn on the vacuum and turn on your lathe...

Oneway, 3 1/2” Drum for Vacuum Chuck with 1 1/4" x 8 TPI Insert

Please check with us for availabilityOneway Model #3008, 3-1/2” Vacuum Chuck, with 1 1/4" x 8 TPI InsertVacuum chucking is one of those things that has to be seen to be believed. Put your piece on the drum chuck, turn on the vacuum and turn on your lathe...

Oneway, 3 1/2” Drum for Vacuum Chuck with M33 x 3.5mm Insert

Please check with us for availabilityOneway Model #3008, 3-1/2” Vacuum Chuck, with M33 x 3.5mm InsertVacuum chucking is one of those things that has to be seen to be believed. Put your piece on the drum chuck, turn on the vacuum and turn on your lathe...

Oneway, 3 1/2” Drum for Vacuum Chuck with 1" x 8 TPI Insert

Please check with us for availabilityOneway Model #3008, 3-1/2” Vacuum Chuck, with 1" x 8 TPI InsertVacuum chucking is one of those things that has to be seen to be believed. Put your piece on the drum chuck, turn on the vacuum and turn on your lathe...

Oneway, 3 1/2” Drum for Vacuum Chuck with 3/4" x 16 TPI Insert

Please check with us for availabilityOneway Model #3008, 3-1/2” Vacuum Chuck, with 3/4" x 16 TPI InsertVacuum chucking is one of those things that has to be seen to be believed. Put your piece on the drum chuck, turn on the vacuum and turn on your lathe...

Oneway, Vacuum Pump, 220 Volt

Please check with us for availabilityOneway Vacuum Pump - 220 Volt. In order to turn using vacuum, you will need a vacuum pump and/or motor. Due to the seriousness of injury that can occur due to vacuum pump failure, Oneway R&D was extensive and thorough...

Oneway, Neoprene Rings for 12" Vacuum Chucks, 5 Pack

Please check with us for availabilityOneway 12" Neoprene Rings for Vacuum Chucks, Pack of 5Vacuum chucking is one of those things that has to be seen to be believed. Put your piece on the drum chuck, turn on the vacuum and turn on your lathe. Your piece...

Oneway, Vacuum Pump, 110 Volt

Please check with us for availabilityOneway Vacuum Pump - 110 Volt. In order to turn using vacuum, you will need a vacuum pump and/or motor. Due to the seriousness of injury that can occur due to vacuum pump failure, Oneway R&D was extensive and thorough...

Oneway, 3 1/2” Drum for Vacuum Chuck, No Insert

Please check with us for availabilityOneway 3-1/2” Drum Chuck with No InsertVacuum chucking is one of those things that has to be seen to be believed. Put your piece on the drum chuck, turn on the vacuum and turn on your lathe. Your piece is held...