Robust, American Beauty 25" Woodturning Lathe, Standard Bed, 3HP Motor

Product Description

The American Beauty is a premium bowl and vessel lathe that is setting a new standard for woodturners around the world. It has a sliding headstock, stainless steel ways and industrial grade motor and controls. It offers power and stability thata is virtually unmatched in a woodturning lathe. It is Made in the USA and comes with a full 7 Year Warranty, including the headstock bearings. The Robust American Beauty has a 25" Diameter inboard turning capacity and a 2 position pulley for a speed range of 50 - 3000 RPM. If you are ready to step up to the lathe of your dreams, check out the Robust American Beauty.

• The American Beauty lathe has a sliding headstock, stainless steel ways and industrial grade motor and controls. It can be purchased with a 2 or 3HP motor in 220 volt only. Variable speed, forward and reverse are standard.
• ADJUSTABLE HEIGHT: The American Beauty adjusts to fit you. Each leg is made from 3 x 3 square steel tubing and adjusts independently. The apron that holds the leg is made from 7ga. steel. There are lips in the aprons where you can put a shelf to hold tools or add more weight.
• POWER TO SPARE: Low end torque is ensured by the vector style motor drive with auto tune. The motor drive (aka: “VFD” or “Inverter”) is housed below the lathe in the leg assembly, protected and out of the dust. Motors are either Baldor or Leeson. Either motor is high-efficiency and industrial-grade. Both are made in the USA. In addition, there are two belt ranges: high speed and high torque.
• CONTROL: The corded pendent controller is fitted with two rare earth magnets and can be moved anywhere along the lathe bed, on the leg assembly, tailstock, banjo or on the headstock. You can start and stop the lathe, change direction and change speed all with this unit.
• BEARINGS: Robust used heavy duty 6300 series on the American Beauty which carry 40% more dynamic load than the bearings the competition uses on their big lathes. Because of this, Robust is the only lathe manufacturer to warrant the headstock bearings, and to warrant them for a full seven years.
• SPINDLE: Spindles are machined from pre-hardened and stress relieved 4140 Chrome Moly alloy steel. The bearing journals are precision ground to within 0.0003". Robust also uses the universal standard spindle nose size for larger lathes: 1 1/4" x 8 TPI, so that a great variety of chucks, faceplates and other accessories will fit. A metric spindle threaded 33 x 3.5 is also available. Recognizing the need to turn in reverse occasionally, especially for sanding, the spindles incorporate a safety groove for a set screw. Locking the spindle disconnects the controls, so no more burnt belts if you try to start the lathe with the spindle lock engaged.
• HEADSTOCK AND TAILSTOCK: The headstock is relieved in front, allowing great access to the back of the work. Both the headstock and tailstock are formed from cast iron in a US foundry and then precision CNC machined to exacting tolerances. To move them, lift the large lever, slide to the new position, and push down on the lever to lock it in place. To ensure alignment, push them against the back way when you lock them down. This way the tennon underneath makes firm contact and lines up the centers.
• INDEXING: 48 position indexing is standard and accessed from inside the headstock.
• BED CONSTRUCTION: All Robust lathes come with stainless steel ways standard. 3/8" thick structural steel tubing is used on the American Beauty. The bed is a square tube set on the diamond – that lets the chips fall away much better than a round bed or a cast bed with reinforcing ribs. Bed extensions are constructed of the same heavy materials.
• TILT-AWAY: The optional American Beauty Tilt-Away gets the tailstock completely out of the way and allows you to quickly and easily bring it back into position. Add a gas shock and make re positioning the tailstock a one finger operation.

• Standard Features:
• Sliding Headstock
• Stainless Steel Ways
• 25” Inboard Capacity, 60” Outboard
• Adjustable Spindle Height
• Corded Pendant Controller
• 3 HP 220 volt US Made Motor
• Premium Vector Drive with Auto-Tune
• Variable Speed, Forward/Reverse
• Graduated Quill

• Robust American Beauty Dimensions
• Robust American Beauty Spec Sheet



Robust combines skillful engineering and quality materials to produce premium woodturning lathes and accessories. Designing from the turners perspective lets you concentrate on turning instead of fussing with your lathe. All Robust lathes and accessories are made in Barneveld, Wisconsin USA by skilled craftsmen.




⚠ WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer.  Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection.  For more information go to http://www.P65Warnings.ca.gov/fact-sheets/wood-dust

111724