Powermatic, OES9138, Oscillating Edge Sander, 3HP, 3PH, 230/460V

Product Description

The large 11-3/4" x 48" table on the OES9138 oscillating edge sander travels a full 8" in vertical height to accommodate most woodworking pieces. It will also tilt negative 5° and out to positive 45°. The cast iron platen is a generous 48" x 9-1/2" and covered with graphite for production sanding, offering super support and cooler running to extend belt life. With 24 oscillations per minute you can use the entire belt face without burning. A 3HP motor powers the belt and runs a large gearbox to provide the oscillating action. The entire head pivots on a massive shaft with two sealed ball bearings for trouble-free performance. Dual dust collection ports keep the work area clean and extend the life of your abrasive belt.

• Dual dust collection ports
• Dual dust collection ports keep work area clean and extend abrasive belt life
• Heavy-duty oscillating gearbox and shaft for long maintenance-free use
• Hinged guard opens for infinite length sanding
• Large 11-3/4" x 48" front worktable with 8" vertical travel and 45° tilt, includes miter head for angle work
• Large radius end table has 6" vertical travel and 45° tilt for any angle and working height needed
• Oscillates 24 cycles per minute for better finish and longer belt life
• Precision balanced 9" diameter drive drum and 4" diameter rubber coated idler pulley for positive drive and rigid tracking
• Rugged bearing-assisted tensioning device for fast belt changes and quick adjust tracking
• Spring loaded, quick release lever makes belt changes quick and easy

• Style (Type) = Oscillating Edge
• Belt Speed (SFPM) = 3,542
• Motor Power (HP) = 3
• Dust Collection Minimum CFM Required (CFM) = 1,100
• Dust Port Outside Diameter (In.) = 4
• Motor Phase = 3
• Overall Dimensions (L x W x H) (In.) = 83 x 32 x 50
• Net Weight (Lbs.) = 800
• Gross Weight (Lbs) = 870
• Height = 0.0000
• Length = 0.0000
• Weight = 870.0000
• Width = 0.0000
• Dust Port Outside Diameter (In.) = 4
• Motor Power (HP) = 3
• Motor Phase = 3
• Motor Voltage (V.) = 230/460
• Prewired Voltage (V.) = 230
• Recommended Circuit Size (Amps.) = 15/10
• Height = 0.0000

• Length = 0.0000
• Weight = 870.0
• Width = 0.0000

• Find out more about our JPW Shipping Policy Here



The Woodturning Store is proud to be an authorized Powermatic dealer. Powermatic is an iconic brand of woodworking machinery, getting its start in 1921 in McMinnville, Tennessee and today is a part of JPW Industries, a world leader in tools and machinery for hobbyists, schools and industry. We are a full line dealer for Powermatic, Jet Tools and Wiltons brands and can offer every single product in their lines. Contact us with any questions you may have. We are always happy to help you making the best selection for your needs.




⚠ WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer.  Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection.  For more information go to http://www.P65Warnings.ca.gov/fact-sheets/wood-dust

112124