Product Description
This item is in stock and ready for immediate shipping from our warehouse
Oneway Vari-Grind 2 Attachment (with base) for the Wolverine Grinding Jig. The Wolverine Vari-Grind will properly shape and maintain the edge on standard bowl gouges, the modern side grind (also known as the Ellsworth grind, Liam O'Neil, or Irish grind), and the traditional fingernail shape for spindle work detailing.
Oneway has set the standard for sharpening jigs with the Wolverine system. Your woodturning shop is not complete without the Wolverine system as part of your grinder setup. The Vari-Grind is the industry standard Jig for properly shaping a fingernail or swept back grind on a gouge.
Features:- Oneway Model #3920
- Vari-Grind 2 Grinding jig for the Wolverine Sharpening System (with base)
- This single jig will produce every shape from fingernail grind right up to the side grind and everything in between to suit your needs
- The side or long grind on deep fluted bowl gouges is superb for rapid hollowing, is useful on the outside of bowls, and is suitable for some spindle work
- To sharpen the tool, the end of the Vari-Grind is placed into the pocket of the Vee-Arm of the Wolverine Grinding Jig. This allows the proper bevel to be set, and provides a steady and reliable means of grinding tools
- This Oneway Attachment not only allows you to get complete control of your grind, but you can easily duplicate the same grind. The results are cleaner cuts, and tools that are safer, more predictable and that last longe
Founded in 1991, a family-owned company has consistently manufactured the finest woodturning lathes and equipment available anywhere. Oneway is now into its third decade of state-of-the-art engineering and manufacturing of woodturning lathes and related equipment.
âš WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to http://www.P65Warnings.ca.gov/fact-sheets/wood-dust
112124Product Videos
Custom Field
Product Reviews
1 Review Hide Reviews Show Reviews
-
Great for Us New to Turning and Sharpening
The included instructions do not give the base mounting instructions. I went to the Oneway website and downloaded the instructions for the complete Wolverine system which has the mounting instructions and measurements. The holder attachment has a series of steps on the side that allow for very precise and repeatable angle adjustments on the pin. This seems to be a newer feature. I HIGHLY recommend an eight inch slow speed grinder with one inch wide grinding wheels. I set it up initially on a six inch full speed grinder and found I needed to build a three inch block to bring the grinder up to the recommended 6 3/8 spindle center height. Also the 3/4 inch wheels on the six inch grinder were just a little too narrow, and the high speed overheated the steel. I am still learning how to use this tool, but I expect to be able to sharpen my chisels rapidly and accurately with this system.
