Product Description
Please check with us for availability
Oneway Vacuum Pump - 110 Volt. In order to turn using vacuum, you will need a vacuum pump and/or motor. Due to the seriousness of injury that can occur due to vacuum pump failure, Oneway R&D was extensive and thorough. For this reason, they decided on a superior vacuum pump for vacuum chucking purposes.
Vacuum chucking is one of those things that has to be seen to be believed. Put your piece on the drum chuck, turn on the vacuum and turn on your lathe. Your piece is held quickly and securely. Work is not marked and can be removed instantly when the vacuum is turned off. With this set up you will be able to add a professional touch quickly and easily to almost all your work. To use these products your spindle must: have a through hole, be threaded at the outboard end, have no cross holes drilled.
Features:- Oneway Model #2997-110
- In order to turn using vacuum, you will need a vacuum pump and/or motor
- Specifications: 1/4 HP (Horse Power), Will draw 26½ inches of mercury, 4.5 CFM at open, 110 Volt power reuqirement
- Oneway Vacuum Pumps feature internal filters to keep sawdust and contaminants from entering the pump, high quality, oil-less carbon vane pump to ensure no environmental contamination and low noise levels
- Made in USA
Founded in 1991, a family-owned company has consistently manufactured the finest woodturning lathes and equipment available anywhere. Oneway is now into its third decade of state-of-the-art engineering and manufacturing of woodturning lathes and related equipment.
⚠ WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to http://www.P65Warnings.ca.gov/fact-sheets/wood-dust
110824
