Product Description
Please check with us for availability
Oneway Bent Bar with cutter for Hollowing
The Oneway Laser-Guided Hollowing System has been designed to make turning hollow forms easier and safer. A laser pointer is set so the laser light is offset from the cutting tip by the desired wall thickness of the vessel. As the vessel is hollowed and the cutting tip moves outward the laser light follows. Once the cutter reaches the desired thickness, the laser light falls off the vessel. Back arresting the hollowing bar reduces the strength needed to control the bar and controls twisting forces which allows the use of offset bars. Because the tips can be rotated, only three bars are required to hollow a 7 inch diameter sphere through a 1 inch hole with a 1 inch long neck.
Features:- Oneway Model #3480
- Single bent bar with cutter for hollowing vessels
- The bars are stainless steel and 5/8” in diameter. The 5/8” diameter was chosen as it allows easier access around the tight neck of a vessel where vibration is not a problem. For deeper vessels an optional ¾” bar adaptor is available as well as a 1” straight bar
- Because the tips can be rotated, only three bars are required to hollow a 7 inch diameter sphere through a 1 inch hole with a 1 inch long neck
- The cutter is made from M2 HSS and can be easily sharpened on a grinder. It is ground on the outside like any standard scraper. It can also be honed on the top if required
Founded in 1991, a family-owned company has consistently manufactured the finest woodturning lathes and equipment available anywhere. Oneway is now into its third decade of state-of-the-art engineering and manufacturing of woodturning lathes and related equipment.
⚠ WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to http://www.P65Warnings.ca.gov/fact-sheets/wood-dust
122124
