Oneway, 2036 Lathe, 2 HP Motor

Product Description

Oneway 2036 Lathe with 2 HP Motor

• Oneway Model #2036
• 20” swing over the bed; 36” between centers
• Spindle Thread: M33 x 3.5 RH (inboard and outboard); 5/16” thru hole (in spindle); 6 position spindle lock; 7½° (48 position) indexing; Spindle is the cartridge type and can be pulled fully assembled from the headstock by removing six bolts
• #2 Morse Taper in headstock; #3 Morse Taper in tailstock
• 220V input, Single Phase; AC Electronic Variable with built-in ramp up/ramp down and dynamic braking; 2 HP motor; Drive pulleys are 3 step 10 groove poly V (20 - 800/190 - 1900/305 - 3050)
• 2 - 3000 RPM with Full Speed Reverse; Drive controls are mounted on a swinging pendant which can be moved to the headstock or tailstock for easy and safe reach at all times
• The Tailstock has an 1½” diameter quill with 4” travel; The lead screw is a ¾” diameter 6 pitch acme thread and the barrel has a 3½” bearing length; Patented clamping mechanism in Banjo
• Overall Length: 60"
• Weight: Approximately 650 lbs

• The toolrest is made from ductile iron, it is stronger and lasts longer than cast iron. It is suitable for under and overhanded grips. It is 14” long with a 1” diameter post
• Drive motor is mounted directly below the headstock in a base housing welded to the bed tube; Lathe runs extremely quiet
• The spindle nose, which holds the front bearings, protrudes approximately 3” in front of the headstock allowing easy tool maneuvering when working on the backside of a plate or bowl
• The headstock features a three bearing spindle. At the front, one angular contact bearing is locked to the shaft with a clamp ring and lock nut. This minimizes radial and axial play of the spindle. The rear bearings float axially to allow for heat expansion. All bearings are maintenance free and lubricated for life. It is made from high alloy steel hardened and ground to precision tolerance of ±0.0003”
• Super rigid Tailstock clamp is designed to eliminate flexing under clamp pressure. This ensures that the clamp holds firmly while requiring no adjustment for the life of the lathe and will retain the ease of movement of the Tailstock along the bed
• he Banjo is a radical new design that assures even, powerful locking anywhere on the bed. The sliding cam is supported by a cam support block which rests on a ledge machined in the toolrest base
• Bedways and ribs are welded to a 10¾” dia. by 5/16” wall tube. The assembly is stress relieved and precision machined. Almost perfect torsional rigidity is achieved many times more so than twin tube or cast iron bed designs

Founded in 1991, a family-owned company has consistently manufactured the finest woodturning lathes and equipment available anywhere. Oneway is now into its third decade of state-of-the-art engineering and manufacturing of woodturning lathes and related equipment.

⚠ WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer.  Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection.  For more information go to http://www.P65Warnings.ca.gov/fact-sheets/wood-dust