Oneway, 20"-24” Laser Hollowing System, no clamp block

Product Description

Oneway 20-24” Complete Laser Hollowing System (NO clamp block). Laser guided hollowing systems allow the turner to easily gauge the wall thickness of a vessel while it is being cut.

The Oneway Laser-Guided Hollowing System has been designed to make turning hollow forms easier and safer. A laser pointer is set so the laser light is offset from the cutting tip by the desired wall thickness of the vessel. As the vessel is hollowed and the cutting tip moves outward the laser light follows. Once the cutter reaches the desired thickness, the laser light falls off the vessel. Back arresting the hollowing bar reduces the strength needed to control the bar and controls twisting forces which allows the use of offset bars. Because the tips can be rotated, only three bars are required to hollow a 7 inch diameter sphere through a 1 inch hole with a 1 inch long neck.

• Oneway Model #3518
• For lathes with 20"-24" swing
• Complete Package Includes: 5/8" Straight Cutter Bar, 5/8" Single Bend Cutter Bar, 5/8" Double Bend Cutter Bar, 1" Straight Cutter Bar, Deep Hollowing Bar, Laser Assembly, Backrest Assembly
• Laser guided hollowing systems allow the turner to easily gauge the wall thickness of a vessel while it is being cut. Back arresting the hollowing bar reduces the strength needed to control the bar and controls twisting forces which allows the use of offset bars
• A laser pointer is set so the laser light is offset from the cutting tip by the desired wall thickness of the vessel
• The bars are stainless steel. The 5/8” diameter allows easier access around the tight neck of a vessel where vibration is not a problem
• The laser light system can be used on any machine with a flat bed that can support a rear back rest. A rear back rest support is necessary because the laser light must be held square to the bed of the lathe

Founded in 1991, a family-owned company has consistently manufactured the finest woodturning lathes and equipment available anywhere. Oneway is now into its third decade of state-of-the-art engineering and manufacturing of woodturning lathes and related equipment.

⚠ WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer.  Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection.  For more information go to http://www.P65Warnings.ca.gov/fact-sheets/wood-dust