Product Description
Please check with us for availability
Oneway 20-24” Back Rest without clamp block.
The Oneway Laser-Guided Hollowing System has been designed to make turning hollow forms easier and safer. A laser pointer is set so the laser light is offset from the cutting tip by the desired wall thickness of the vessel. As the vessel is hollowed and the cutting tip moves outward the laser light follows. Once the cutter reaches the desired thickness, the laser light falls off the vessel. Back arresting the hollowing bar reduces the strength needed to control the bar and controls twisting forces which allows the use of offset bars. Because the tips can be rotated, only three bars are required to hollow a 7 inch diameter sphere through a 1 inch hole with a 1 inch long neck.
Features:- Oneway Model #3487
- For lathes with 20"-24" swing
- The Oneway backrest can be adjusted for height with two screw adjusters. This allows you to get the backrest flat and the right height. The height of the opening in the gate is also adjustable with screw adjustment
- The gate can also be propped open to allow easy insertion and removal or heavy boring bars; the gate can then be set back shut to the preset height
- The backrest is offset and has a slotted base so it can be set with the wide part of the backrest to the front or to the back and for very large offsets it can be rotated
- Oneway Tool Rest Selection Chart
Founded in 1991, a family-owned company has consistently manufactured the finest woodturning lathes and equipment available anywhere. Oneway is now into its third decade of state-of-the-art engineering and manufacturing of woodturning lathes and related equipment.
⚠ WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to http://www.P65Warnings.ca.gov/fact-sheets/wood-dust
122524
