Oneway, 1224 Lathe, 220 Volt

Product Description

Oneway 1224 Lathe - 220 Volt

• Oneway Model #1224
• 12½” swing over the bed (9” swing over Banjo); 24” between centers
• Spindle Thread: 1” x 8 TPI RH (inboard), ¾” x 16 TPI RH (outboard); Spindle Height: 44½”; 7/16” thru hole (in spindle); 24 position indexing; Spindle is hardened and ground
• #2 Morse Taper in headstock and tailstock
• 220V input, Single Phase; 1HP AC variable speed inverter (drive) with dynamic braking; 1HP Marathon Motor; 2 step pulley (0 - 2000 / 0 - 4000 rpm)
• Forward and Reverse with two pre-programmed accel / decel settings; Two position Control Box
• High Performance Powder Paint on Stand and Lathe; Cast Iron Tailstock with Acme thread and 3” quill travel; Patented clamping mechanism in Banjo; Offset Bed for easy clean up
• Bench Height: 30”
• Length x Width: 47" x 23 ½”
• Weight: Approximately 300 lbs.

• Package Includes:
• Powder Painted Lathe and Powder Painted Metal Stand (two wood shelves included)
• #2 MT Safe Driver and #2 MT Live Center (with cones)
• Knock-out Rod
• 3” Steel Faceplate (Powder Painted)
• 11” Stainless Steel Toolrest with 1” Post
• Two location Control Box
• Leveling Pads
• 4mm, 6mm and 8mm Allen Keys and Spindle Lock Wrench
• Hand Wheel

Founded in 1991, a family-owned company has consistently manufactured the finest woodturning lathes and equipment available anywhere. Oneway is now into its third decade of state-of-the-art engineering and manufacturing of woodturning lathes and related equipment.

⚠ WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer.  Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection.  For more information go to http://www.P65Warnings.ca.gov/fact-sheets/wood-dust