Product Description
Please check with us for availability
Easy Wood Tools, Model 6200, Mini Easy Finisher
Like the other Easy tools, the Easy Finishers are designed to be used with the tool rest set so that when the tool is held level the top of the cutter is on center. Then just keep it level to the floor and flat on the tool rest for all types of cuts... it does not get any easier than that. There are no complicated approach angles, or bevels to ride. The design of this tool allows the Easy Finisher to effortlessly cut from the center of a bowl out to the rim OR from the rim to the center! All without changing any angles whatsoever. You just stand in one spot and cut coming and going until you get to the shape you want.
Features:- Maple handle: 12" | Tool bar: 3/8" x 4" | Overall length: 16" | Max reach: 2"
- The round cutters are primarily designed for inside and outside curves and final shaping
- Comes equipped with standard cutter Ci3 (round), and a hex key
- Replacement: Ci3 standard cutter
- Optional: Ci3-NR negative rake cutter
- Tool bars are engraved with corresponding carbide cutter part numbers, so it’s easy to know which cutter goes with which tool
- Check out the PRODUCT VIDEOS tab above to watch videos related to this product
Easy Wood Tools offers a series of replaceable carbide cutter woodturning tools that address fatigue, safety and efficiency. Designed to effortlessly remove massive amounts of material on any project without the need for sharpening. Designed with support directly beneath the cutting edge transferring the cutting pressure downward allowing the lathe to take the pressure that normally would go to your hands and body.
âš WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to http://www.P65Warnings.ca.gov/fact-sheets/wood-dust
111824
