Axminster, 38mm O'Donnell Dovetail Jaws

Product Description

The unique design of the O’Donnell Jaw allows access around the jaws for close-in tool work. The jaws are approximately 49mm (1 15/16") tall, tapering to the nose. This tapering gives the jaws their advantage when working close. The centre bore forms a deep recess for holding long spigots and gives rock solid mounting when turning a long way from the headstock without tailstock support. The jaws are dovetailed both inside and outside on the lip. The 38mm (1 1/2") O’Donnell Jaw expands into a 52mm (2 1/16") dovetailed recess, and contracts onto a 40mm (1 9/16") dovetail or 33mm (1 5/16") spigot. The Axminster chuck offers plenty of leeway; externally 49mm (1 15/16") to 66mm (2 5/8") and internally 35mm (1 3/8") to 50mm (2") dovetail or 28mm (1 1/8") to 43mm (1 11/16") spigot. Suitable for SK100 4" and SK114 4 1/2" chucks only. Made from stainless steel to protect against corrosion.

• Potential gripping range: Internal dovetail 35mm to 50mm (1 3/8" to 2")
• Potential gripping range: External dovetail 49mm to 66mm (1 15/16" to 2 5/8")
• Potential gripping range: Spigot 28mm to 43mm (1 1/8" to 1 11/16")
• Drawing dimensions taken when jaws form a true circle
• Recommended for SK100 4" and SK114 4 1/2" chucks
• Designed for close-in tool work
• Made from stainless steel to protect against corrosion
• Made in Axminster, UK
• 1-year guarantee
• All sizes in inches are for reference only and are not as accurate as the sizes shown in millimeters. For best accuracy, please measure in millimeters.

• Check out the PRODUCT VIDEOS tab above to watch videos related to this product
• View our Axminster Chuck Jaws Comparison Page.



A range of super precision chucks and accessories, all uniquely designed and manufactured by those who truly understand woodturning. Precision-made in high grade stainless steel, the Chucks and their associated accessories have been developed over the years, to cover almost every situation likely to be encountered by the amateur or professional alike. In addition to chucks, Axminster Woodturning offers a Tailstock and Drive Centers, modular Tool Rests and Tools for Pen Making.




⚠ WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer.  Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection.  For more information go to http://www.P65Warnings.ca.gov/fact-sheets/wood-dust

112124